What is sequestering agent?

The basics of swimming pool maintenance.
New swimming pool owner's questions.
Help getting started with daily pool care.
Pool Newbie
Pool Newbie
Posts: 3
Joined: Wed 05 Sep, 2007 21:59
Location: Mobile,Alabama

What is sequestering agent?

Postby stanton » Mon 08 Oct, 2007 09:21

Need to do a ascorbic acid treatment and doing research.
chem geek
Pool Industry Leader
Pool Industry Leader
Posts: 2366
Joined: Thu 21 Jun, 2007 21:27
Location: San Rafael, California

Postby chem geek » Mon 08 Oct, 2007 12:43

This question was already answered on poolcenter(dot)com here and at TroubleFreePool(dot)com here. A sequestering agent combines with metal ions to hold them into solution.

The purpose of ascorbic acid for removing metal stains, especially iron, is to dissolve the oxide of iron (which is the stain itself) via the acid and to reduce it to a more soluble form (ferrous instead of ferric) that is better held by a sequestering agent. So to use the ascorbic acid, one must lower the Free Chlorine (FC) level in the pool to below 1 ppm (or to zero) so it is best to add some PolyQuat 60 algaecide before letting the chlorine drop in order to prevent algae. The same principle applies to copper stains except that they do not need to get reduced (but the acid from ascorbic acid is still effective at removing the stain when combined with a sequestrant to keep it in solution).


Postby Guest » Mon 08 Oct, 2007 15:01

Thanks Richard.

Okay...Use a sequestrant to keep it in solution. Then the filter removes it?
Thanks so much. I'm still learning how to do this right.

Return to “Basics for New Pool Owners”

Who is online at the Pool Help Forum

Users browsing this forum: Linkdex [Bot] and 0 guests