Air in pipes from solar heater

Adding chemicals, vacuuming, backwashing,
brushing, filter care, filter cleaning, replacing
worn or broken pool parts
Florida man

Air in pipes from solar heater

Postby Florida man » Fri 04 Jan, 2008 12:27

My spa has a "bubbler" type fountain. Water from the spa flows into the pool. When the solar panels come on, air is introduced into the system and there is not enough pressure for the bubbler. Eventually, the air is blown out and the bubbler works. This may take an hour or two. I can force it by holding my hand over one of the pool inlets thereby increasing the pressure to the spa. The pipes are above ground by my pump. This is where I think the air collects. Two of the pipes have manually adjustable valves and go to the spa. The other other goes to the pool.

My question is this: Is there a passive device that I can install that will bleed the air from the pipe?


Poolo

Bubbles

Postby Poolo » Sat 05 Jan, 2008 19:43

A check valve on the return line to the spa should do the trick, especially if it is real close to the spa itself.

Return to “Routine Pool Cleaning & Maintenance”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests