CLOUDY BLUE WATER!!

Causes and cures for cloudy swimming pool water.
Milky pool water, white, pink, brown, purple, black cloudy water.
flocculantly fed up

hovering flocculant in sunny spain

Postby flocculantly fed up » Tue 25 Jul, 2006 02:51

am looking ater my dads pool, he has a salt chlorinization thingy, before he went back home to England he added flocculant to the pool.

Every morning i get up to a lovely clear pool, with this yucky yellowy stuff hovering about 10cm from the bottom of the pool.

I try vaccuming and it stirs it up, I've run the filter continuously for 2 days with no improvement, backwashed, rinsed about a hundred times.

I'm now resorted to donning a snorkel and mask and floating around the pool with the pipe trying to suck this stuff up !! there is some improvement each day, but I think I might still be doing this in September !!

please help, and remember i have no idea what shocking means or anything else you guys are talking about !!

:roll:


Eric

Re: Floc made my pool extremely cloudy!!!!

Postby Eric » Fri 16 Feb, 2007 03:43

Mullins wrote:okay, i used the floc as you suggested...it immediately made my pool cloudy (i could see the bottom of the pool before the floc, now i can't even see the bottom in the shallow end) is this normal? I shut it off overnight, went out there this morning, the pool is still just as cloudy as can be and i cannot see the bottom. it has made it worse!!! what can i do now?????????? HELP!!!!


It can take a couple of days to let all the particles settle to the pool floor and when it does I suggest you vacuum it out to the drain line therefore bypassing the filter where it could possibly return into the pool. Hope this helps
Floc Man

Floc Added WORKS!

Postby Floc Man » Wed 28 Mar, 2007 16:40

This review made me laugh so much, i've even sent the link to my pals so a bit of viral you will be famous.

Mullins are you a woman? you nag like one!

Anyway had the same problem and added floc and voila pool is sparkling, can see the bottom after 5 days of cloudy blue.

Floc that!
flocisgood

Postby flocisgood » Wed 25 Apr, 2007 14:17

Last year iI had the same cloudy water problem. Used floc and it cleared it. If you have a sand filter, DO NOT pour this stuff into the skimmer, pour it by a return jet, so to disperse it with the water. If you pour it in the skimmer, it will clump your sand. I had this happen ( along with other problems), with my sand filter and had to replace the sand. Needless to say, I don't own a sand filter anymore. I invested in a cartridge filter, and have been happy so far. Opened my pool last week with cloudy water, shocked it, and 2 days later, presto clear water. My point is, if you have a consistant problem with cloudy water, and your levels are balanced, your filter is not working, or is inadequate for your pool needs. To me, cartridge seemed the way to go. No backwashing, just rinse the cart off with a hose. No recharging DE either. Then again, some people swear by sand or DE. But in my experience, 90% of the problems I see in forums are not from cartridge owners.

Just my 2¢.
poolhappy

cloudy here too

Postby poolhappy » Tue 15 May, 2007 12:25

I have to say I really needed the laugh! This was the best blog I have ever read. After all the giggles I will try to floc my pool as it is a lovely shade of blue. I did just have my water tessted and all the levels are in line, so I am up to flocking! LOL OMG this was the best! Thanks! :lol:
smoore
Pool Newbie
Pool Newbie
Posts: 3
Joined: Wed 16 May, 2007 22:32

well water cloudy

Postby smoore » Wed 16 May, 2007 23:07

Hey Everyone,
I sure could also use some help with this water/chemical stuff. I just put a pool 18x4, 3 weeks ago, filled with well water. it was a rust color, pool store told me to put in suspend, and then shock it, which i did. everything settled to the bottom, now water is cloudy and brown can not see but a few inches deep, after vac for days, I have a cartridge filter, 3 days ago I put 4 gals of liquid shocker in, no change, tonight I put 6 gal of bleach in, have ran filter for 24/7 since filling it. I put bleach in about hour ago, this is my readings:
CYA=300
TA= 180
PH= not even in the color pad at all (deep purple)
CHILORINE=10-20
TH=1000
I know just putting the bleach effects this, I will re test tomorrow.
Can anyone tell me what to do next? Oh yea it is suppose to rain tonight.
me_too

Re: well water cloudy

Postby me_too » Thu 17 May, 2007 05:42

smoore wrote:Hey Everyone,
I sure could also use some help with this water/chemical stuff. I just put a pool 18x4, 3 weeks ago, filled with well water. it was a rust color, pool store told me to put in suspend, and then shock it, which i did. everything settled to the bottom, now water is cloudy and brown can not see but a few inches deep, after vac for days, I have a cartridge filter, 3 days ago I put 4 gals of liquid shocker in, no change, tonight I put 6 gal of bleach in, have ran filter for 24/7 since filling it. I put bleach in about hour ago, this is my readings:
CYA=300
TA= 180
PH= not even in the color pad at all (deep purple)
CHILORINE=10-20
TH=1000
I know just putting the bleach effects this, I will re test tomorrow.
Can anyone tell me what to do next? Oh yea it is suppose to rain tonight.

Well water is usually high in hardness, alcalinity and pH. It's exactly what we're seeing here.

We could control the scaling tendencies of such a water by using a low pH and calcium sequestrant. However in this case the CYA is very very high and this needs to come down, this is the first thing to do. Unfortunately the only way to do this is to partly drain the pool.
smoore
Pool Newbie
Pool Newbie
Posts: 3
Joined: Wed 16 May, 2007 22:32

cloudy water

Postby smoore » Thu 17 May, 2007 12:34

Hello again,
Draining! How would that help, wouldn't I still be in the same boat, I would be filling with the same well water.
The water looks same today, after retesting nothing much has changed.
CYA=300
TA=180
PH=Still no reading
CHILORINE=10-20 It could even be a little higher
TH=400 (So it has come down some)
Isn't there anything I can do? I know that shocking takes the PH out, So how do you get it back in?
weather getting nicer, need clear water.
smoore
Pool Newbie
Pool Newbie
Posts: 3
Joined: Wed 16 May, 2007 22:32

same boat

Postby smoore » Fri 18 May, 2007 21:22

Will nothing has changed I put some ph in, and some clarifer my reading are no better.
cya=100
ta=180
ph= different color but still no color on stick
chilorine=10/20
th=400
Is there an answer
twmackey
Pool Newbie
Pool Newbie
Posts: 5
Joined: Sun 20 May, 2007 19:09

Postby twmackey » Mon 21 May, 2007 18:56

Another way to do this is to drain your pool alittle bit and as you are draining it add water to it. set you selector valve to waste and if have a limner then remove a foot of water below the scimmer do not take any more than a foot though, because the line may pool from the wall. luckly my will not go past about 10 inch when irt starts to loose suctin. Any way do this about thrree times and it will givbe you more clean water. I did this when I had too much copper in the water. it worked great. I live in a area where is not a problem usually.

Return to “Cloudy Pool Water”

Who is online at the Pool Help Forum

Users browsing this forum: Omgili [Bot] and 0 guests