auto pilot pool cleaner

SWGs, salt water chlorine generators, chlorinators,
ozone generators, UV systems, . . .
minivolks
Pool Newbie
Pool Newbie
Posts: 2
Joined: Fri 13 Feb, 2009 09:46

auto pilot pool cleaner

Postby minivolks » Fri 13 Feb, 2009 09:51

My box tells me that my temp sensor is bad. My piping looks like an upside U. There are two wires going to the cleaner itself and one wire going to another place. Is the one wire the temp sensor. Can you post pics on this site?


User avatar
Larry
Pool Forums Admin
Posts: 371
Joined: Thu 09 Dec, 2004 20:19
My Pool: Inground concrete 72m2
Tiled overflow pool
2 Hp pump mono
Fiberglass sand filter 920mm
Tiled deck

Re: auto pilot pool cleaner

Postby Larry » Wed 25 Feb, 2009 11:53

I'm not sure which model you are referring to, but if the single wire you mention goes to the center piece of the inverted U it is the sensor that measures flow, salt level and water temperature.

As a registered user you are able to post pictures up to 256kb.
Let us know the model you have as this may help too.

Return to “Salt Water Chlorine Generators, Ozone, UV”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests