New product to remove calcium hardness??

Total hardness and calcium hardness in pool water.
Scale, calcium buildup, hard water and scaling problems.
photogold

New product to remove calcium hardness??

Postby photogold » Mon 06 Apr, 2009 16:29

Leslies just started selling a new product that will *remove* calcium hardness in your pool. The product is Caltreat from United Chemical. I called United Chemical and asked if this is another sequestering agent. The rep said no, it is not a sequestering agent, it will remove calcium from the pool. One application is supposed to decrease calcium hardness by 200-400ppm. The rep said that after adding Caltreat, if no new calcium is added to the pool, the the CH level should stay at the reduced level, no additional treatment required. When I pressed him on where the calcium goes, he was somewhat vague, but suggested that it precipitates, and is collected in the filter. He says there is one other competing product available on the market. He said that the product has been available for about 1 year, but he said they don't have any information posted on their website. Caltreat sells for about $29 at Leslies.

If it does what it says, this would be much better than draining the pool. Is this too good to be true? Could this possibly just be just masking the test?

Chem Geek, what is your take on this?

Does anyone have experience with this product?


chem geek
Pool Industry Leader
Pool Industry Leader
Posts: 2382
Joined: Thu 21 Jun, 2007 21:27
Location: San Rafael, California

New product to remove calcium hardness??

Postby chem geek » Mon 06 Apr, 2009 20:42

This was brought up here , but we don't really know what is in it. One reliable way to remove calcium is to add phosphates since calcium phosphate is insoluble, but then you end up with phosphates in the water. The plus side to this is that they are a strong pH buffer. The downside is that they are also an essential nutrient for algae. Of course, one can prevent algae growth in spite of high phosphate levels.

So if it's not a calcium sequestrant and not phosphate, then I don't know what it is. Does it say anything on the bottle that might give a clue either to its ingredients or to side effects (i.e. preciptates calcium; gets caught in filter; balances pH)?

Richard
Aquaclear-NZ
Pool Care Proficient
Pool Care Proficient
Posts: 32
Joined: Sat 21 Mar, 2009 15:21
My Pool: ingound, 50,000L, gas heated, low energy pump and cartridge filter
Location: Auckland

New product to remove calcium hardness??

Postby Aquaclear-NZ » Tue 14 Apr, 2009 03:52

our chemical supplier picked up on this last year, really due to water shortages in australia, dumping pool water is not an option

i have some at the office i can tell you what is claimed to be in it

we have sold quite a bit, and the feedback has been good, however the directions are a bit vague

will post some more info as it comes to hand
Chocolate fish do not swim in hot water
California Pool Owner

New product to remove calcium hardness??

Postby California Pool Owner » Mon 08 Jun, 2009 16:45

Save your money - it doesn't work. Used it as directed & did everything it said to on the label.

Calcium level increased. It also totally wiped out all the clorine in the pool. We have a salt pool, don't know if that made a difference.

C
Guest

New product to remove calcium hardness??

Postby Guest » Fri 21 Aug, 2009 12:19

The reason your calcium went up is because the pool was more than likely scaled. I have had several people tell me the same thing and we found out the pool was scaled. s
Rickster
Pool Newbie
Pool Newbie
Posts: 1
Joined: Wed 28 Jul, 2010 12:39

New product to remove calcium hardness??

Postby Rickster » Wed 28 Jul, 2010 12:43

So if it's "scaled", what's the solution?

I have a pentair IC-40 Salt generator.
I'm getting white flakes coming out.
Also impossible to remove white ring around spa tile (actually quartzite).

Is scale different than calcium buildup?

I've heard of Scaltec and Beautec?

Suggestions?
chem geek
Pool Industry Leader
Pool Industry Leader
Posts: 2382
Joined: Thu 21 Jun, 2007 21:27
Location: San Rafael, California

New product to remove calcium hardness??

Postby chem geek » Wed 28 Jul, 2010 14:04

Unless your Calcium Hardness (CH) is very high, the scaling is most likely coming from a Total Alkalinity (TA) and pH that are too high. Read Water Balance for SWGs and note that a lower TA will not only help to reduce scale but will also lower the rate of pH rise allowing you to prevent the pH from getting too high. You can also use 50 ppm Borates in the pool to act as an additional pH buffer (after you've got your TA lowered) to help prevent scaling in the SWG cell.
pool tile cleaning

New product to remove calcium hardness??

Postby pool tile cleaning » Tue 21 Sep, 2010 23:34

Don't forget, the spa is the first to get that super dose of "salt water". I would put in your budget to have a pool tile cleaning service clean your pool tile annually. It will save you in the long run! :thumbup:
Ca

New product to remove calcium hardness??

Postby Ca » Tue 23 Nov, 2010 17:20

Just increase the pH to about 10-12 and wait until the calcium precipitates and settles to the bottom. Vacuum to waste, rebalance the water. Done.
chem geek
Pool Industry Leader
Pool Industry Leader
Posts: 2382
Joined: Thu 21 Jun, 2007 21:27
Location: San Rafael, California

New product to remove calcium hardness??

Postby chem geek » Tue 23 Nov, 2010 21:55

Wouldn't that produce scale on pool surfaces (and pipes if you kept circulating)? Precipitating is one thing, but producing scale on plaster surfaces is another.

Return to “Hard Pool Water & Scale”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests