Swimming pool repair technician

Discussions that do not fit into any of the
swimming pool categories and general topics.
Billy boy
I'm new here
I'm new here
Posts: 1
Joined: Mon 20 Apr, 2009 09:08
Location: Hungary

Swimming pool repair technician

Postby Billy boy » Tue 21 Apr, 2009 17:19

Hi you all, my name is Bela,I'm new on the forum. 1996-2006 Owned a pool repair remodeling business in Florida USA. Please PM me for CV. I'm looking for work,all around the world. Have my own tools,dive gear,own work truck passible, Thanks good luck.


nancy44
I'm new here
I'm new here
Posts: 1
Joined: Tue 13 Nov, 2018 08:16

Re: Swimming pool repair technician

Postby nancy44 » Tue 13 Nov, 2018 08:30

Hello,

Can you give me some tips for swimming pool leakage repair???Its kids swimming pool.
how to repair cracks which is major???
Please reply...
Thanks...
Daph
I'm new here
I'm new here
Posts: 1
Joined: Sun 09 Dec, 2018 16:07
My Pool: Hi one skimmer two holes. One nearest pool has sand I think down it and no flow. Other nearest pump not functioning very hard. Have two flow switches on pipes to sand filter. Have them both open but even when one closed suction not great. Would it be because sand in hole skimmer near pool or some other reason!

Re: Swimming pool repair technician

Postby Daph » Sun 09 Dec, 2018 16:15

Hi two holes in skimmer. One nearest pool has sand in it. Is this a problem as no suction from it. Other hole not sucking great either but nothing as far as I can determine in it. Two handles on pipe to sand filter. One controls bottom vent and other top skimmer I think. Is this right. Is the sand in hole nearest pool creating a problem?
Teapot
Swimming Pool Superstar
Swimming Pool Superstar
Posts: 486
Joined: Tue 17 Oct, 2017 10:52
My Pool: 12 x 24 (45m3) liner pool, Triton TR60 filter with AFM glass media (Activate) and variable speed pump running 0.08HP
Location: UK

Re: Swimming pool repair technician

Postby Teapot » Tue 11 Dec, 2018 09:40

Examine the skimmer, that sand may have just collected in the blanked off hole. Might only be 2"deep, bottom drains do almost nothing so close that valve off after fully opening the skimmer one. What does your pressure gauge read?

Return to “Poolside - General Discussions”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 1 guest