Problems relating to pH and total alkalinity.
Increase ph, increase TA. Reduce pH, reduce TA.
pH chemistry advice and techniques for the pool.


Postby rmen003 » Sat 27 May, 2006 07:15

What do I use to test the ph in the water?

I'm new here
I'm new here
Posts: 2
Joined: Fri 02 Jun, 2006 04:52

Postby oasis » Fri 02 Jun, 2006 05:03

i use a test kit phenol red solution

Postby John » Sun 04 Jun, 2006 11:47

Buy a GOOD test kit from your pool supply house and follow the directions. The kits, in my opinion, are much better than the test strips. Get a kit that will test for free and total chlorine, pH, total alkalinity, cyanuric acid and total hardness. The kit will run about $60.00 to $70.00 and will last all season. Next season replace all the reagent bottles or buy a new kit. The kits come with a booklet that will give detailed instructions on how to adjust your water. Best wishes.

Return to “pH & Total Alkalinity”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 1 guest