We have only had our above ground pool for a year and I have found that we have a wrinkle in the liner that goes all the way around the pool. I did find some advice on useing a plunger to pull it out; however if this doesn't work can we pull the liner up, and if so will we need to drain the pool under or near the wrinkle? Yet another question, how long do I have to fix this before it damages the liner? Thanks for all of your help!
Samantha
LARGE wrinkle
-
bswest
- I'm new here
- Posts: 2
- Joined: Sun 28 May, 2006 08:00
- Location: NC
-
bswest
- I'm new here
- Posts: 2
- Joined: Sun 28 May, 2006 08:00
- Location: NC
what we have done
After much work on the liner we are about half way around...We took the lip off the top of the pool in sections at a time, myself on the inside and hubby on the out, using a plunger and squeege we worked the wrinkles up to the top and my husband pulled the excess over the edge. This seems to be working; however, I am not to sure what we are going to do around the skimmer pot and jet?!?
Just thought I would let everyone know what was working for us.
Return to “Liner & Above Ground Pools”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 0 guests