Fiberglass lining peeling off

Tile, mosaic, marbelite, Marcite, Marblesheen,
fiberglass, plaster, shotcrete, paint, epoxy coatings.
Use, care and repair of the various surfaces.
bedking25
I'm new here
I'm new here
Posts: 2
Joined: Fri 15 May, 2009 15:59
My Pool: 18*34 fiberglass lined over concrete. hayward 1100 pump with 1 1/2 hp
Location: florida

Fiberglass lining peeling off

Postby bedking25 » Fri 15 May, 2009 16:39

i have a 18*34 fiberglass lined over, what i believe to be concrete, pool. the pool is probably at least 30 yrs old. it has been refinished with the fiberglass lining within the past 20yrs, maybe less, not sure. my problem is the fiberglass is peeling off in small pieces, creatiung a 18*18 inch round circle, but it keeps growing daily it seems. what are my options as far as to repairing.


mvdevildog

Fiberglass lining peeling off

Postby mvdevildog » Fri 15 May, 2009 18:18

I have the same problem. Same scenario. Fiberglass over gunite. I used a product called Pool Putty. Epox materila cures underwater. I applied to the perimeter of the opening and it hardened at stoped the whole from spreading. Has lasted one season so far. Comes in Blue and White tubes.

http://www.recreonics.com/pool_patching.htm

Good Luck
bedking25
I'm new here
I'm new here
Posts: 2
Joined: Fri 15 May, 2009 15:59
My Pool: 18*34 fiberglass lined over concrete. hayward 1100 pump with 1 1/2 hp
Location: florida

Fiberglass lining peeling off

Postby bedking25 » Sat 16 May, 2009 14:27

ok thanks ill give it try
vsherry

Fiberglass lining peeling off

Postby vsherry » Fri 24 Jun, 2011 20:35

My fiberglass was chipping off, I reapaied with pool putty, but now the chipping and flaking away is all over the pool. Can I sand and feather it out and put another coat of fiberglass over the entire pool?

Return to “Pool Surface Discussions”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 6 guests