Ozone question

SWGs, salt water chlorine generators, chlorinators,
ozone generators, UV systems, . . .
RonnieZ
Pool Newbie
Pool Newbie
Posts: 1
Joined: Sat 23 May, 2009 12:59
Location: San Antonio TX, USA

Ozone question

Postby RonnieZ » Sat 23 May, 2009 13:26

I have a 17,000 gal gunite pool with a Sunshine copper,zinc,silver ionizer and a THUNDER
Corona Discharge Ozone Generator with a Thunderstorm injector system.
My questions are about the ozone generator...

1. Should I be seeing bubbles only in the mixing/injector chamber ( Picture at http://www.sunshinepool.com/ozone1.html )
or should there be bubbles actually coming out of the eye inlets on the sides of the pool?
Right now I have bubbles coming out of the inlets but doubt this is correct procedure.

2. I see there are test strips advertised on the 'net to test ozone levels. What would a good level be?
I know that as soon as you turn off the ozone gen., the ozone rapidly depletes so when should the test be done?

Thanks!


Return to “Salt Water Chlorine Generators, Ozone, UV”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 9 guests