skimmer water depth

Stairs, skimmers, jets, drains, lighting, water features
and miscellaneous pool water fixtures and fittings.

skimmer water depth

Postby ken1954 » Thu 01 Apr, 2010 11:23

I presently have the water depth about 1/2 inch below the very top of the skimmer opening. The skimmer does not work very well even if I route all water return through the skimmer. Would the skimmer work better if the water level were lower. If so, how much lower?


skimmer water depth

Postby mike45 » Fri 02 Apr, 2010 18:46

water level is fine unless it is sucking air, check catridge filter or backwash sand filter and see if that helps , post and ill tell you some other options if it doesnt work hope this helps hopefully nothing is clogging your line

Return to “Skimmers, Jets, Lighting & Other Pool Fixtures”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 1 guest