Heaters Clunking Gas Valve

Automatic pool cleaners, vacuum heads, pool covers,
decks, fencing, pool alarms and security ....
I'm new here
I'm new here
Posts: 1
Joined: Fri 02 Apr, 2010 22:48
My Pool: 33ft kidney with attached spa.
Location: California

Heaters Clunking Gas Valve

Postby ballgame100 » Fri 02 Apr, 2010 22:53

Pool Heater Question: Raypack Model C-265B-EN - natural gas.
From a medium/low thermostat setting, I start the unit and the following happens:
The pilot ticks, ignites, flames up for a second then shuts down, at which point the gas valve starts "clicking" and "clunking"...with intermittent pilot ticking... the higher I move the thermostat, the slower and more pronounced the "clunk".... Through it all, I can see that the pilot is still lit. help. argh. Thanks. - John

User avatar
Pool Clown
Swimming Pool Wizard
Swimming Pool Wizard
Posts: 88
Joined: Thu 10 Sep, 2009 00:15
My Pool: Uses a Chlorine generator, not a Salt Water Generator (SWG).
Location: Silicon Valley, CA

Heaters Clunking Gas Valve

Postby Pool Clown » Thu 15 Apr, 2010 07:46

Check (all) ground wires and flame rectifier for soot and correct gap.
Factory warranty service for Pentair, Jandy, Raypak, Polaris, and Paramount pool cleaning systems.

Return to “Pool Equipment & Other Pool Maintenance”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 0 guests