hayward northstar pool pump lid
hayward northstar pool pump lid
Have a less than a year old pool pump. The lid comes off fairly easy, but I have trouble replacing it. It's Really tight. Have to use a rubber mallet. Is their a trick to putting it on.
hayward northstar pool pump lid
It helps if you put pool lube on the seal and the plastic lip. Also, it helps to loosen the lid while the pump is on. Just don't turn it all the way or it will pop off when the pump is turned off.
Mark
Hydraulics 101; Pump and Pool Spreadsheets; Pump Ed 101
18'x36' 20k gallon plaster/gunite pool, 1/2 HP 2sp pump, Aqualogic PS8 SWCG, 420 sq-ft Cartridge Filter, Solar Panels, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Hydraulics 101; Pump and Pool Spreadsheets; Pump Ed 101
18'x36' 20k gallon plaster/gunite pool, 1/2 HP 2sp pump, Aqualogic PS8 SWCG, 420 sq-ft Cartridge Filter, Solar Panels, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Return to “Pool Pumps, Filters, Plumbing & Piping”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 21 guests