Pump shuts off after 60ish seconds no error codes

SWGs, salt water chlorine generators, chlorinators,
ozone generators, UV systems, . . .
dkhoop
I'm new here
I'm new here
Posts: 1
Joined: Fri 09 Apr, 2021 19:42
My Pool: Intex 20x48 Salt Water

Pump shuts off after 60ish seconds no error codes

Postby dkhoop » Fri 09 Apr, 2021 19:55

I have owned a Intex Krystal Clear 2150 GPH Sand Filter Pump & Saltwater System with E.C.O. for 2 years now. This year however, when I turn on the pump it automatically shuts off after around 60 seconds. I can immediately turn it back on and the same thing happens. I've been looking for any help with this all over the place. Do I need to swap anything out? Any and all help is greatly appreciated.

Things I've checked.

Swapped the power cord out for a different one. Thinner, but brand new.
Taken apart the pump to make sure nothing was lodged inside and it spins freely.
Cleaned the sand filter out.


Return to “Salt Water Chlorine Generators, Ozone, UV”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 10 guests