Need help Pairing cup pool with system

SWGs, salt water chlorine generators, chlorinators,
ozone generators, UV systems, . . .
Music Fusion
I'm new here
I'm new here
Posts: 1
Joined: Fri 04 Jun, 2021 14:47
My Pool: Intex

Need help Pairing cup pool with system

Postby Music Fusion » Fri 04 Jun, 2021 14:59

I have purchased an Intex 14' X 42" Prism frame pool. This is it: https://www.modernbee.ca/good-price-for ... e-pool-set

Here are the specs they list:

Hydro Aeration® Technology is incorporated into the cartridge filter pump providing improved circulation and filtration, improved water clarity, and increased negative ions at the water surface. Follow these 3 steps for easy assembly. 1) Lay out the liner for your pool on flat, level ground. 2) Assemble the frame for your pool. 3) Fill your pool with water and enjoy. It comes with a 1,000 gal cartridge filter pump, ladder. Water capacity is 3,357 gallons (90%) and it is ready for water in 45 minutes.

Innovative T-joint – simplified with no pins required
Puncture resistant 3-ply durable material
Faster and easier assembly with no tools required
Dual suction outlet fittings – improve water circulation resulting in better water hygiene and clarity
Includes a
Includes pool ladder, ground cloth and pool cover
Approximate set-up size: 14ft X 42in
Water capacity: 3,357 gallons (90%)
Ready for water in approximately 45 minutes


I need help identifying what I need to make the pool referenced above, a saltwater based pool.

Here is a link tot he pumps they list under saltwater https://www.modernbee.ca/intex-pumps/sa ... -pump.html

Can someone help me identify what I need? Also, are one of these all that is needed, or do I also need a sand pump?

Thanks for your time and expertise!


Return to “Salt Water Chlorine Generators, Ozone, UV”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 7 guests