Added Bluechem Zap it now there is a thick layer of white foam on top of pool

What is floc, clarifier, stabilizer, cyanuric acid,
algaecide, brightener, dichlor, sodium hypo,
sodium bisulfate, ....??
Poolgalbeginner
I'm new here
I'm new here
Posts: 1
Joined: Tue 08 Feb, 2022 04:30
My Pool: 30 000 +/- liters
Blue Chip Tile
Pump (bypass/circulate, filter, etc. Settings)

Added Bluechem Zap it now there is a thick layer of white foam on top of pool

Postby Poolgalbeginner » Tue 08 Feb, 2022 04:37

:roll: Added Algaeside (Bluechem Zap it) now there is a thick layer of white foam on top of the pool water. How long will it take to go away?


Teapot1
Pool Industry Leader
Pool Industry Leader
Posts: 1176
Joined: Thu 29 Apr, 2021 00:43
My Pool: 12000 gallons vinyl liner,

Re: Added Bluechem Zap it now there is a thick layer of white foam on top of pool

Postby Teapot1 » Fri 11 Feb, 2022 03:08

Why do people keep getting suckered into using algaecides that simply put DO NOT WORK.
They are NOT strong enough to undo an algae problem. They cause the chlorine to go quicker as the chlorine tries to burn out the algaecide.
Chlorine, the best anti algae you can use and its cheap!
I may not give you the answer you want to hear, but I will give an honest opinion of your situation as you decribe it.

Return to “Pool Chemical Problems & Swimming Pool Chemicals”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 7 guests