Hi,
Recently, I have problem with my pump and filter. They don't seem to work well with functions. What do you suggest to get them fixed? Or should I go with new ones to replace the old one? The old ones were bought about 5 months ago. Please let me know your advice so that I can get them work.
Thanks.
Problem with Pump and Filter
-
- I'm new here
- Posts: 3
- Joined: Thu 15 Sep, 2016 07:05
- My Pool: Small size. Super Pump and Filter. It is Oval with cover.
- Contact:
-
- Pool Industry Leader
- Posts: 2592
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Problem with Pump and Filter
What do you mean by this?micheallang wrote: They don't seem to work well with functions.
-
- I'm new here
- Posts: 3
- Joined: Thu 15 Sep, 2016 07:05
- My Pool: Small size. Super Pump and Filter. It is Oval with cover.
- Contact:
Re: Problem with Pump and Filter
Thanks for your reply. They don't perform well. Water seems to be dirty, and the flow of water is weak. Not as they used to be. That's what I mean.
I am seeking for best above ground pool
-
- Pool Industry Leader
- Posts: 2592
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Problem with Pump and Filter
Hi Micheal
What type of filter do you have?
Does it return OK when MPV is set for recirculate?
Have you Backwashed?
Is the pump sized correctly for your filter?
Is your water low? (it should be half way to two thirds of your skimmer and the flap should move freely)
Is air being sucked into your pump? (is the pump basket full or does it have air in it when running)
Do you have Pine trees nearby as these needles can get into the pump and block it
What type of filter do you have?
Does it return OK when MPV is set for recirculate?
Have you Backwashed?
Is the pump sized correctly for your filter?
Is your water low? (it should be half way to two thirds of your skimmer and the flap should move freely)
Is air being sucked into your pump? (is the pump basket full or does it have air in it when running)
Do you have Pine trees nearby as these needles can get into the pump and block it
Return to “Liner & Above Ground Pools”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 7 guests