Waterfall Issue
-
- I'm new here
- Posts: 1
- Joined: Mon 15 Mar, 2021 14:22
- My Pool: In ground, 2000 gallon
Waterfall Issue
Hi everyone. I am having an issue with the waterfall feature in our pool. it worked fine for years, now all of a sudden when I switch the valve from pool return to waterfall, the psi on my water filter jumps from 10 to 25 and I get very little pressure from the waterfall. I have checked and cleaned out the slot where the water comes out and can confirm it is not blocked. I’m not sure what to do next. Please help. Thanks.
-
- Pool Industry Leader
- Posts: 1337
- Joined: Tue 17 Oct, 2017 10:52
- My Pool: 12 x 24 (45m3) liner pool, Triton TR60 filter with AFM glass media (Activate) and variable speed pump running 0.08HP
- Location: UK
Re: Waterfall Issue
Check the diverter valve and try blowing out the line with a shop vac.
If there is a suitable hole open at each end without something living inside it has to work. 25psi should clear it, try a hose down the line.
If there is a suitable hole open at each end without something living inside it has to work. 25psi should clear it, try a hose down the line.
Return to “Pool Equipment & Other Pool Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 12 guests