Sheer descent water fall feature not even flow

Stairs, skimmers, jets, drains, lighting, water features
and miscellaneous pool water fixtures and fittings.
hcavazosjd
I'm new here
I'm new here
Posts: 1
Joined: Tue 25 May, 2021 09:32
My Pool: 15,000 gallon in-ground pool with spa attached and sheer flow waterfall

Sheer descent water fall feature not even flow

Postby hcavazosjd » Tue 25 May, 2021 09:41

Our pool was installed fairly recently. From the beginning, we noticed that the sheer descent water feature did not have a sheer descent water flow. What we get is several streams of water that do not connect/touch each other. If you pass a finger across the spill slit, they connect and you get the sheer descent effect, but I don’t think I should have to do that every time we start the water fall. If you look inside the slit, there’s these dividers that separate the water, but I don’t know if those were supposed to be removed or what. I know the easiest solution would be to contact the builder, but that’s not an option for us (there were lawsuits and BBB complaints involved). Any ideas and/or help is appreciated


Return to “Skimmers, Jets, Lighting & Other Pool Fixtures”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 3 guests